COMPLETE DJ EQUIPMENT PACKAGE - WIRED AND READY TO USE

Description

COMPLETE DJ EQUIPMENT PACKAGE...
CONTAINS:
STANTON RM-22 4CH MIXER
NUMARK CDN 22 MK III DUAL CD PLAYER
FURMAN RP8 POWER CONDITIONING MODULE
AUDIO TECHNICA ATW-R12 WIRELESS RECEIVER and MICROPHONE
SKB TRAVEL CASE / COVER 1SKB-84DJ (DJ SHUTTLE)
WIRING AND POWER CORDS INCLUDED
LOCAL PICKUP IS AVAILABLE (I WILL TRAVEL A MODERATE DISTANCE TO FACILITATE)
Stanton RM-22 Mixer:
Broad frequency response, very low noise, low crosstalk, and supremely quiet pots make this a truly high-quality unit for the serious DJ on a budget. Balanced master out, assignable crossfader, independent gain controls on each channel, dual 7-band graphic EQ, individual mic EQ, fader start, and a ballsy cue section provide unparalleled versatility that won't let you down under fire.
FEATURES
Balanced master output
Fully assignable crossfader
Gain control with clip LED on each channel
Dual 7 band EQ with on/off switch
Mics 1 and 2 feature 2 band EQ plus on/off and talkover function
Fader start
Cue section features PFL, cue pan, stereo/split, and 2 headphone outputs
Master output with mono/stereo switch
Zone and booth outputs
Output LEDs switchable between master and zone
3 phono, 9 line, and 3 mic inputs
SST - Superior Sound Technology
Ultra low noise circuitry
No bleed through
Low distortion
SPECIFICATIONS
Frequency Response 20Hz to 20kHz +1dB
THD+N (Line) > 0.005 % at 1kHz
Signal to Noise Ratio (ref: max level) > 109dB (main signal path)
Noise -98dBV (Line input to any output)
Crosstalk
(Line to Line, Phono to Line, Line to Phono) > -90dB
Fader Kill > -90dB
Microphone EQ Hi, Low +/-10dB
Graphic EQ (7 band stereo) 40Hz, 80Hz, 160Hz, 500Hz, 1.6kHz, 3.2kHz, 6.4kHz +/-10dB
Line Inputs 7 (RCA) , 1 (1/4" Balanced) -10dBV / >10kOhm
Phono Inputs 2 (RCA), -50dBV / 47kOhm
Phono / CD 1 (RCA), -50dBV (Phono) -10dBV (Line) / 47kOhm
Mic Inputs 2 (1/4"), 1 (XLR) -50dBV / 2.4kOhm
Master Outputs 2 (1/4") Balanced/ (RCA) unbalanced,
+4dBu balanced / -10dBV unbalanced
Zone Output 2 (RCA) unbalanced / -10dBV
Booth Output 2 (RCA) unbalanced / -10dBV
Record Output 2 (RCA) unbalanced / -10dBV
Headphone Output 1 (1/4 inch), 1 (1/8 inch)greater than 32 ohm load
Dimensions (LxWxD) 18.9 in. x 8.66 in. x 4.72 in. (48 cm. x 22 cm. x 12
cm.)
Numark CDN-22 Dual CD Player:
Quantization: 16-bit linear/channel, 3 beam laser
Oversampling rate: 8 times
Frequency response: 20Hz-20KHz
Channel separation: 86dB
T.H.D. + NOISE: 0.01%
S/N ratio (IHF-A): 94dB
Output level: 2.0Vrms
Short access time (Play next track): less than 1.7sec
Long access time (Track 1 ->Track 20): less than 3sec
Start Time: less than 0.3 sec
Pitch control range: +/-12%
Pitch bend: +/-16%
Digital Output: Type 2, form 1, S/PDIF (Sony/Phillips Digital Interface Format)
Dimensions (W x H x D):
Main Unit: 482mm x 88.8mm x 264mm (without feet); 19" x 3.5" x 10 3/8" (without feet)
Control Unit: 482mm x 88.8mm x 75mm (without feet); 19" x 3 1/2" x 2 7/8" (without feet)
Weight:
Player Unit: 5 Kgs; 11 lbs.
Control Unit: 2 Kgs; 4.4 lbs
Power Supply: 115/230V AC, 50/60Hz
Power Consumption: 25W
Furman RP8 Power Conditioning Module:
A RP-8 Power Conditioner is the perfect AC power solution for any rack mount system.
The eight switched outlets in the rear panel will power up and protect all your equipment up to a 1800-WATT capacity.
Audio Technica ATW-R12:
Known for outstanding audio quality and reliable performance, this full-rack professional wireless system includes a True Diversity VHF receiver and a handheld mic.  The body-pack (included) is a different frequency and may or may not be compatible.  There are two antennas that feed two completely independent RF sections on the same frequency; automatic logic circuitry continuously compares and selects the superior received signal, providing better sound quality and reducing the possibility of interference and dropouts. The receiver is designed to be mounted in a standard 19" rack (1U) (Already done !)
SKB DJ Shuttle Case / Dust Cover:
Features:
Top: (8U) 5.25" - 2.5" Depth (Slant)
Bottom: (4U) 15.25" Depth
Protective dust cover
Convenient rear access panel
Weights & Dimensions:
Rack Space Units Top 8 / 8
Rack Space Units Bottom 4 / 4
Rack Depth Front Rail to Back Lid 15.25 in / 38.74 cm
Shipping Weight 14.00 lb / 6.35 kg
Product Weight 11.30 lb / 5.13 kg
Advantages of SKB Cases:
Lifetime SKB Warranty!  No questions asked!  No receipts required!  For any defective products; Send back to SKB and they will replace it or repair it!
Very light-weight!
Advanced Engineering Giving SKB Superior Stregnth Compared To Any Other Cases On The Market
Maximum Impact Resistance Protects Your Equipment Better Than Anything Else
These Cases Can WithStand All Sorts Of Punishment