Furez SP8-WP38NP - Bare Copper Spade Speaker Connectors Crimp/Solder - Per Pair

Description

The Furez the SP8-WP series is part of the Furez line of "Sized Right" 8mm (5/16") Spade Speaker Connectors that feature a cold weld crimp connection for the most efficient speaker cable connection. The Furez SP8-WP series connectors are designed for very experienced cable builders seeking the ultimate in speaker cable connectivity. The WP series spade connectors additionally feature 2 opposing solder windows for easy soldering and a non-conductive anodized aluminum protective shell. The SP8-WP series spade speaker connectorss are offered in varying sizes optimized for common speaker cable gauges. The XL version of the WP series connectors is designed for installations when 2 conductors are used in one connector. The larger ID of the XL connectors allows the insulation of the 2 conductors to be inside the barrel of the connector. Furez Products also has the TST-SB set screw series banana connectors which are designed for the cable builder with moderate cable assembly experience that wants the ability to change out or reuse connectors.
Sized Right:
All Furez "Sized Right" speaker cable connectors are designed for specific speaker cable gauges and have varying internal diameters to maximize contact of the speaker wire strands within the bore of the speaker cable connector. When a connector is properly sized to the speaker cable gauge, the resulting connection will be optimized for both conductivity and strength. Sizing of crimped connectors is very important and the connector must be sized to match the wire gauge.
Maximized Signal Conductivity:
The Sized Right feature of the SP8 spade speaker connectors is a significant factor in maximizing signal conductivity but there are other significant factors to consider as well.
•  Solid Single Piece Conductive Path: The Furez line of spade speaker wire connectors are designed to have a single continuous conductive path from the wire to the end of the spade. This eliminates the added contact resistance associated with the common multi-piece design.
•  Bare Copper Non-Plated Connectors: The use of bare non-plated copper connectors provides the natural high conductivity connection of a bare speaker cable termination without the safety hazard of shorting wire strands. Bare electronic grade copper will not turn green or oxidize heavily under normal conditions and some simple handling practices will keep you copper looking and performing quite well for many years.
Furez SP8-WP38NP Series Spade Connector Specifications:
•  Nominal Size: 3.8mm
•  Connector ID: 0.150" (3.8mm)
•  Cover ID: 0.250" (6.3mm)
•  Max Single Wire: 10 AWG
•  Max Paired (2) Wire: 14 AWG x 2
•  Plating:
NP
- Not Plated - Bare Copper
•  Designed for common 8mm (5/16") binding posts
•  Machined from C1100 100% IACS Copper
•  Single Piece Electrical Path Construction Maximizes Signal Conductance
•  25 Deg Offset Angle
•  Crimp or Crimp & Solder or Solder Termination
•  Dual Opposing Solder Windows
•  Connection Protected with Anodized Aluminum Shell
•  Internal Depth: 0.600” (15.25mm)
•  Recommend Cable Strip Length 0.600” (15.25mm)
•  Overall Length: 2.046" (51.96mm)
•
Includes:
- Pair Latex Gloves (One Per Order - Not Per Pair)
- Reusable Dry Cleaning Wipe for Copper & Silver (One Per Order - Not Per Pair)
Sold Per Pair
Going out of business!
Prices are very low, even compared to brass connectors and these are high grade pure copper. This is not red copper (brass).
Inventory not sold by 12/05/22 will be sold as one lot to a retailer and this listing will disappear!